My Guides
Guides I've Contributed To
Answers
-
Answer to "Can I use the z1 transmission in my 93 EG SI?"You can use the K20Z1 engine and transmission but the engine wiring harness and ECU are not compatible with our conversion wiring. You will need to use the 02-04 engine wire harness and ECU along with a speed sensor converter.
-
Answer to "How to install 3.5 inch Civic Si intake on fn2"The battery tray does not fit the FN2 and the filter bracket will need to be modified.
-
Answer to "Can you give me a swap parts list of mounts wire harness charge harnes"Please email support@hybrid-racing.com
-
Answer to "03 civic k20A2 swap"Check out the Ultimate K-swap guide listed on our homepage. https://www.hybrid-racing.com/pages/the-ultimate-k-swap-guide
-
Answer to "Can I use a 2005 tsx 6 speed ecu for the k24 swap on a 99 civic?"Sorry no, the TSX ECU is not compatible with the engine conversion. You should use only the 02-04 RSX ECU and engine wire harness.
-
Answer to "How to wire the relay"You can see the image above for the compressor relay.
-
Answer to "wide band to kpro for datalogging"View this for wideband KPRO input settings: https://www.hondata.com/help/kmanager/in... The wire input signal is ELD pin E15.
-
Answer to "Wich one should I buy"The K20A engine from the Euro Accord CL7 is similar, but not the same as the K20A from the DC5 or EP3. Because of that our typical engine mounts will not work since the transmission is like that from the TSX (K24A2) You’d have to use the Hasport EKK3 mount kit if you plan to use the K20A Euro engine and trans. You’ll also need to use the Accord shifter and shifter cables as well.
Reputation over time
Reputation Breakdown
| Event | Count | Delta |
|---|---|---|
| Admin approved your guide | 3 | 1140 |
| Someone completed your guide | 1 | 30 |
| Patrolled edit to guide intro accepted | 2 | 2 |
| Patrolled edit to wiki accepted | 2 | 2 |
| Patrolled edit to guide step accepted | 2 | 2 |
| Patrolled edit to guide accepted | 1 | 1 |
128